☼ Assembly Instructions ☼ | |
1. After unwrapping your hoop, it may need reshaping before it is put together. Simply place a foot on one end of the hoop to hold it to the floor, and pull the open ends in an upward direction until the hoop is stretched in a perfect circle. | 2. After your hoop is shaped, fill a pot with approximately 2 inches of water and bring it to a boil. Once boiling, turn off the heat and submerge the open end of your hoop in the water for between 12 and 15 seconds. Do not exceed 15 seconds. |
3. Immediately after heating the open end in water, push the open end onto the connector until they are tightly secured. This should be done within 5 seconds of heating. | 4. Once the hoop is together, cooled, and dry, use your supplied tape to wrap the seam. Now your hoop is ready to play! |
Sunday, May 31, 2009
☼ Putting Your Hoop Together ☼
Subscribe to:
Posts (Atom)