☼ Putting Your Hoop Together ☼

☼ Assembly Instructions ☼
1. After unwrapping your hoop, it may need reshaping before it is put together. Simply place a foot on one end of the hoop to hold it to the floor, and pull the open ends in an upward direction until the hoop is stretched in a perfect circle.	2. After your hoop is shaped, fill a pot with approximately 2 inches of water and bring it to a boil. Once boiling, turn off the heat and submerge the open end of your hoop in the water for between 12 and 15 seconds. Do not exceed 15 seconds.
3. Immediately after heating the open end in water, push the open end onto the connector until they are tightly secured. This should be done within 5 seconds of heating.	4. Once the hoop is together, cooled, and dry, use your supplied tape to wrap the seam. Now your hoop is ready to play!